Peel Adhesion Bond Seal Strength Tester Computerised
Model ELI- P/S/B/AST
Peel Adhesion Bond Seal Strength Tester Computerised
Availability: In Stock
Brand: Laboratory Testing Instruments
The Peel Adhesion Bond Seal Strength Tester Computerised is a precision testing instrument used to measure the adhesive strength of labels, laminates, and flexible packaging materials. It determines the force required to peel or separate bonded materials, helping evaluate adhesive performance and seal strength. The instrument also provides computerised test reporting for convenient result analysis and documentation.
Working Principle of the Peel Adhesion Bond Seal Strength Tester Computerised
The Peel Adhesion Bond Seal Strength Tester Computerised generates graphical test reports that help users analyse sample performance. Its built-in software can be connected to a desktop or laptop for data transfer, test result analysis, and report generation.
The instrument uses two jaws to hold the specimen securely between movable clamps. During testing, a controlled force is applied to peel or separate the bonded materials. A load cell measures the force required for separation, and the readings are displayed on the digital LED display. The test data can then be transferred to the connected computer for further analysis and documentation.
Tests Performed
The instrument can be used to conduct the following tests, depending on the test setup and configuration:
Adhesive Strength Test
Peel Strength Test
Seal Strength Test
Bond Strength Test
Applicable Testing Standards
ASTM D429-14
ASTM D903
The applicability of each standard should be confirmed according to the material being tested and the selected test method.
Features of Peel Adhesion Bond Seal Strength Tester Computerised
Microprocessor-based display for monitoring test results.
Computerised test result analysis and reporting.
Email facility for sharing test reports.
Programmable pass/fail testing criteria.
Built-in software for test data management.
Graphical test reports displaying Force vs. Time.
Digital display of the peel adhesion strength of the test specimen.
Memory storage for up to 9 test readings.
Strong gripping clamps for conducting peel tests at a 180-degree angle.
Dimensions: 600 × 500 × 1120 mm.
Material: Powder-coated mild steel.
Optional Accessories
Computerised model.
Speed drive for improved speed control during testing.
90-degree testing fixture.
- Load Cell Capacity: 20 Kgf
- Display: LED (Digital)
- Accuracy: ± 0.5% within entire range.
- Least Count/Resolution: 0.002Kgf
- Power: 220V, Single phase, 50 Hz
- Speed: 300 mm/min ± 5%